Toro Groundsmaster 7210 - Page 51

RemovingtheFuelTanks(continued)
G036995
g036995
Figure15
1.Flange-headscrew(5each)
4.Controlpanelcover
2.Controlpanel5.Swelllatch(2each)
3.Locknut(2each)
11.Attherightfueltank,removethe5ange-headscrews(item1inFigure15)
thatsecurethecontrolpaneltotherightfueltank.Carefullypositionthe
controlpanelawayfromthefueltank.
12.Loosenandremovethe2screws,2clamps,and2angenuts(items32,25,
and26inFigure14)thatsecureeachfueltanktotheframeofthemachine.
13.Loosenandremovethescrews(items18and30inFigure14),atwashers,
plainwashers,rubberwashers,andangenutsthatsecurethefueltanks
totheframeofthemachine.
14.Liftthefueltankfromthemachine.
15.Locateandretainthespacer(items29and15inFigure14)fromthefueltank.
Note:Forinformationregardingthefuelpumptesting;refertoT estingtheFuel
Pump(page5–43).
Note:RefertotheTractionUnitOperator’sManualforthefuel/waterseparator
andfuellterserviceinformation.
InstallingtheFuelTanks
1.Ifthestrainerttingwasremovedfromthefueltank,performthefollowing:
A.Cleanthethreadsofthefueltankandstrainertting.
B.Applyacoatoffuelresistantthreadsealanttothethreadsofthestrainer
tting.
C.Installthestrainerttingintothefueltankandtightenthestrainer.
2.Iftheelbowandstraightttings(items43and44inFigure14)wereremoved
fromthefuel/waterseparatorhead,applythreadsealanttothettingsbefore
installing.
Groundsmaster7210
Page3–19
DieselEngine:ServiceandRepairs
16222SLRevC