Multi Pro 1200/1250 Page 6 -- 7 Spray System
Special Tools
Spray Pump Alignment Fixture
Thespraypumpalignmentfixtureshouldbeused toen-
surethatthespraypumpmountingbracketispositioned
correctly to the machine frame to allow alignment be-
tween the pump drive gearbox output shaft and spray
pump input shaft. Proper alignment of the pump pre-
vents damage to the pump drivecouplingassembly.In-
structionsforalignmentfixtureareincludedwiththetool.
Toro Part Number: 104--8930
Figure 1
ALIGNMENT
FIXTURE TUBE
ALIGNMENT
FIXTURE STOP
O--Ring Seal Kit
TheO--Ring SealKitincludes anassortmentof O--rings
used for sealing Multi Pro 1200 spray control valves. It
isrecommendedthatO--ringsbereplacedeverytwo(2)
years or whenever a valve is loosened.
Toro Part Number: 106--4846
Figure 2
Spray
System
To Next Page
Loading...
