Multi Pro 1200/1250Page 7 -- 8Drive Train
Troubleshooting
Transaxle
Symptom Possible Causes
Noisy operation. Low oil level in transaxle.
Damaged or worn transaxle bearings.
Transaxle gears worn, scuffed or broken.
Excessive end play in transaxle countershaft.
Gears loose on transaxle shaft.
Excessive wear of differential side gear liners and
pinion liners.
Excessive wear of splined slider on axle drive joints.
Difficult shifting. Shift cable out of adjustment.
Shift cable damaged.
Shifter cap screw loose (at operator position).
Loose shift lever on transaxle.
Cable clamp securing cables near shifter is loose.
Sliding gear tight on transaxle shaft or splines.
Transaxle synchronizing unit damaged.
Transaxle sliding gear teeth damaged.
Transaxle synchro keys damaged.
To Next Page
Loading...
