Multi Pro 1200/1250
Page 5 -- 6
Electrical System
Starting Problems (continued)
Problem Possible Causes
Engine cranks, but does not start. Ignition switch is faulty.
Circuit wiring to engine magneto is grounded (see
Chapter 10 -- Electrical Diagrams).
Circuit wiring to carburetor solenoid is loose, corroded
or damaged (see Chapter 10 -- Electrical Diagrams).
Engine or fuel system is malfunctioning (see Chapter
3 -- Kohler Gasoline Engine).
Engine may be too cold.
Engine cranks (but should not) with the range selector
lever out of the neutral position.
Neutral switch wiring is faulty (see Chapter 10 --
Electrical Diagrams).
Neutral switch is faulty.
General Run Problems
Problem Possible Causes
Battery does not charge. Wiring to the charging circuit components is loose,
corroded or damaged (see Chapter 10 -- Electrical
Diagrams).
Alternator components are faulty.
Battery is faulty.
Engine stops during machine operation. Ignition switch is faulty.
Circuit wiring to engine magneto is damaged (see
Chapter 10 -- Electrical Diagrams).
Circuit wiring to carburetor solenoid is loose, corroded
or damaged (see Chapter 10 -- Electrical Diagrams).
Engine or fuel system is malfunctioning (see Chapter
3 -- Kohler Gasoline Engine).
To Next Page
Loading...
