Rev. A
Multi Pro 1200/1250 Page 3 - 1 Kohler Gasoline Engine
Chapter 3
Kohler Gasoline Engine
Table of Contents
INTRODUCTION 1..............................
SPECIFICATIONS 2............................
ADJUSTMENTS 3..............................
Adjust Engine Speed 3........................
Adjust Choke Cable 4.........................
SERVICE AND REPAIRS 5......................
Cooling System 5.............................
Fuel System 6................................
Exhaust System 8............................
Engine Mounting Plate Assembly 10.............
Removal 11.................................
Installation 12...............................
Engine 14....................................
Engine Removal 14..........................
Engine Installation 16........................
Fuel Evaporative Control System 18.............
KOHLER COMMAND ENGINE SERVICE MANUAL
Introduction
This chapter gives information about specifications and
repair of the Kohler Command engine used in the Multi
Pro 1200 and 1250.
General maintenance procedures are described in your
Operator’s Manual. Information on engine troubleshoot-
ing, testing, disassembly and reassembly is identified in
the Kohler Command Engine Service Manual that is in-
cluded at the end of this section.
Most repairs and adjustments require tools which are
commonly available in many service shops. Special
tools are described in the Kohler Command Engine Ser-
vice Manual. The use of some specialized test equip-
ment is explained. However, the cost of the test
equipment and the specialized nature of some repairs
may dictate that the work be done at an engine repair
facility.
Service and repair parts for Kohler engines are supplied
through your Toro Distributor or a local Kohler Dealer.
Kohler
Gasoline Engine
To Next Page
Loading...
