Multi Pro 1200/1250Page 9 -- 2Sonic Boom System (Optional Kit)
General Information
Installation Instructions
TheSonicBoomKitInstallationInstructionsprovidesin-
formation regarding the installation, operation and gen-
eralmaintenanceforyourSonicBoomSystem.Referto
that publication for additional information when servic-
ing the machine.
Precautions Concerning Chemicals Used in Spray System
Chemicals can injure persons, animals,plants, soil and
otherproperty.To eliminateenvironmental damageand
personal injury:
1. Select the proper chemical for the job.
2. Carefully readthedirections printedon thechemical
manufacturer’s labels before handling chemicals. In-
structions on chemical manufacturer’s container labels
regardingmixingproportionsshouldbereadandstrictly
followed.
3. Keepspraymaterialawayfromskin.Ifspraymaterial
comes in contact with a person, wash it off immediately
in accordance with manufacturer’s recommendations
(refer to container labels and Material Safety Data
Sheets).
4. Always wear protective clothing, chemical resistant
gloves, eye protection and other personal protective
equipmentasrecommendedbythechemicalmanufac-
turer.
5. Properly dispose of chemical containers, unused
chemicals and chemical solution.
Precautions for Removing or Adjusting Spray System Components
1. Parkvehicleonalevelsurfaceandapplytheparking
brake.
2. Shut off the vehicle’s engine and remove the key
from the ignition switch.
3. Disengage all power and wait until all moving parts
have stopped.
4. Remove chemicals from pump, hoses and other
spray components. Thoroughly neutralize and rinse
spray system before loosening or removing any spray
system component(s).
5. Make sure spray systempressure is relieved before
loosening any system component.
To Next Page
Loading...
