Multi Pro 1200/1250 Page 6 -- 27 Spray System
Removal (Fig. 24)
IMPORTANT: Make sure to remove and neutralize
chemicals from spray components before disas-
sembly. Wear protective clothing, chemical resist-
ant gloves and eye protection during repair.
1. Park machine on a level surface, stop engine, en-
gage parking brake and remove key from the ignition
switch.
2. Remove master boom valve handle, spray console
panel and spray console from machine (Fig. 25).
3. Label hoses to allow proper installation after repairs
arecompleted.Loosenhoseclampsandremovehoses
from hosebarbs that are to be disassembled.
4. Remove spray control components as required us-
ing Figures 24 and 26 as guides.
Assembly (Fig. 24)
1. Install spray control components using Figures 24
and 26 as guides.
2. Using labels placed during disassembly, install
hoses to hosebarbs and secure with hose clamps.
3. Operatespraysystemandcheckforleaks.Repairall
leaks before returning the sprayer to service.
4. Installsprayconsole,spraycontrolpanelandmaster
boom valve handle to machine (Fig. 25).
1. Boom valve handle
2. Spray console panel
3. Spray console
Figure 25
1
2
3
1. Flowmeter
2. Pressure control valve
3. Master boom valve
4. Boom distribution valves
Figure 26
2
3
4
FRONT
1
Spray
System
To Next Page
Loading...
