Multi Pro 1200/1250 Page 6 -- 59 Spray System
Removal (Fig. 65)
1. Parkmachineonalevelsurface,placespraybooms
in the transport (raised) position, stop engine, engage
parking brake and remove key from the ignition switch.
2. Disconnect boom actuator from machine wire har-
ness.
3. Remove pivot pin (item 8) that secures actuator to
clevis strap (item 9) on boom frame.
4. Removecotterpin(item12)fromclevispin(item11).
Support boom actuator and slide clevis pin from boom
pivot bracket. Remove actuator from machine.
Installation (Fig. 65)
1. Position boom actuator to boom frame and boom
pivot bracket.
2. Secureactuatortoboompivotbracketwithclevispin
and cotter pin.
3. Secure actuator to clevis strap on boom frame with
pivot pin.
4. Connect boom actuator to machine wire harness.
Spray
System
To Next Page
Loading...
