Multi Pro 1200/1250 Page 3 -- 7 Kohler Gasoline Engine
DANGER
Because gasoline is highly flammable, use cau-
tion when storing or handling it. Do not smoke
while filling the fuel tank. Do not fill fuel tank
whileengine isrunning, hot orwhen machine is
in an enclosed area. Always fill fuel tank outside
and wipe up any spilled fuel before starting the
engine. Store fuel in a clean, safety--approved
container and keep cap in place. Use gasoline
for the engine only; not for any other purpose.
Check Fuel Lines and Connections
Checkfuellinesand connections periodically as recom-
mended in the Operator’sManual. Check lines fordete-
rioration, damage, leaks or loose connections. Replace
hoses, clamps and connections as necessary.
Drain and Clean Fuel Tank
Drainandcleanthefueltankifthefuelsystembecomes
contaminated or if the machine is to be storedfor anex-
tended period.
To clean fuel tank, flush tank out with clean solvent.
Make sure tank is free of contaminates and debris.
Fuel Tank Removal
1. Park machine on a level surface, stop engine, en-
gage parking brake and remove key from the ignition
switch.
2. Usea fueltransfer pumptoremovefuelfrom thefuel
tank and into a suitable container.
3. Note routing of fuel hoses for installation purposes.
Disconnect fuel hoses from fuel standpipe and rollover
valve. Plug fuel hoses to prevent leakage or contami-
nant entry.
4. Remove fuel tank from machine using Figure 5 as a
guide.
5. Remove components from fuel tank as needed us-
ing Figure 6 as a guide.
Fuel Tank Installation
1. Install all removed components to fuel tank using
Figure 6 as a guide.
2. InstallfueltanktomachineusingFigure5as aguide.
3. Remove plugs placed in fuel hoses during fuel tank
removal. Connect fuel hoses to fuel standpipe and rol-
lover valve. Secure fuel hoses with hose clamps.
4. Fill fuel tank.
Figure 6
1. Fuel tank
2. Fuel tank cap
3. Grommet
4. Fuel gauge
5. Rollover valve
6. Standpipe
7. Grommet
8. Bushing
2
3
6
1
5
4
8
7
Kohler
Gasoline Engine
To Next Page
Loading...
