Page 10 -- 12
Spray Circuit
Power Current
Control Current
Indicator/Gauge Current
Multi Pro 1250
(Spray Pump and All Boom Switches ON)
(Master Boom Switch OFF)
RELAY (LOWER)
RELAY (RAISE)
RELAY (LOWER)
RELAY (RAISE)
(OPTIONALKIT)
(ENERGIZED)
(ENERGIZED)
NOTE: WHEN THE PUMP SWITCH IS PRESSED
TO THE MOMENTARYON POSITION, SWITCH
TERMINALS 5AND 6ARE USED TO INITIALLY
ENERGIZE THE PUMPRELAYANDALSO TO CREATE
ALATCHCIRCUIT THROUGH SWITCHTERMINALS
2AND 3. THIS LATCH CIRCUITKEEPS THE PUMP
RELAYENERGIZEDAS SHOWN.
NOTE: WHEN MASTER BOOMSWITCH ISTURNED
OFF, ALL BOOM VALVES WILL CLOSE AND USE
CURRENTAS SHOWN. ONCE BOOM VALVESARE
CLOSED, BOOM VALVE MOTORS WILL EACH BE
SHUT OFF BYA SWITCH IN THE BOOM VALVE. THE
LIGHT INALL SPRAY SWITCHES WIL LNOT BE
ILLUMINATED.
MASTER BOOM
SWITCH
REGULATING
VALVE
RIGHTBOOM
ACTUATOR
LEFTBOOM
ACTUATOR
APPLICATION
RATE SWITCH
RATE LOCKOUT
SWITCH
AD
SHIELD
BLACK
CLEAR
SHIELD
BLACK
CLEAR
To Next Page
Loading...
