To Next Page

To Previous Page

100

6. When the transmissive sensor is selected, the gap between labels shall be 3 mm.

Notes:

1. B-EX4T1 does not support the use of rotary cutters at 10 ips or more, so if the rotary cutter is attached

(with or without cutting), specifying 10 ips or more will correct the operation to 8 ips.

2. In the case of B-EX4T1-G, if a label pitch of less than 15.0 mm is specified by 3 ips and a label pitch of

less than 30.0 mm is specified by 6 ips, then no cut will be issued.

3. For B-EX4T1-T, label pitch less than 15.0 mm by 3 ips, label pitch less than 25.0 mm by 5 ips, no cut

when label pitch less than 38.0 mm is specified by 8 ips It will be issued.

9.6.1.1 ISSUE COUNT

・ 1

・ 3

・ 5

・ 10

・ 50

・ 100

・ 500

・ 1000

・ 5000

9.6.1.2 PRINT SPEED

Selectable printer speed differs depending on the resolution.

B-EX6T1/T3

Resolution

Print speed

203dpi

305dpi

3 ips

5 ips

8 ips

10 ips

12 ips

Supported

Note: When the peel-off issue mode is selected, the maximum speed is limited to 10 ips.

B-EX4T1

Resolution

Print speed

203dpi

305dpi

3 ips

5 ips

6 ips

8 ips

10 ips

12 ips

14 ips

Supported

Not supported

Supported

Not supported

Supported

Not supported

Supported

Note: When the peel-off issue mode is selected, the maximum speed is limited to 10 ips.

Brand	Toshiba
Model	B-EX6T Series
Category	Barcode Reader
Language	English

Toshiba B-EX6T Series User Manual

Table of Contents

Other manuals for Toshiba B-EX6T Series

Questions and Answers:

Toshiba B-EX6T Series Specifications

Related product manuals