Toshiba B-EX6T Series - 9.9 INTERFACE CONFIGURATIONS; 9.9.1 LAN;WLAN SETUP

117
 Settings not printed on the maintenance counter/parameter setting data printout
System mode:
<12>Z-MODE
Item
Initial value
Z-MODE
OFF
User system mode:
<5>SHOW ISSUE COND.
B-EX6T1/T3
Item
Initial value
Sensor
(Note)
TRANSMISSIVE
Mode
BATCH
Print Speed
203 dpi: 5 ips
305 dpi: 5 ips
Ribbon
(Note)
RBN w/o save
Direction
BOTTOM
Media pitch
(Note)
203 dpi: 76.0mm
305 dpi: 76.0mm
Print length
203 dpi: 74.1mm
305 dpi: 74.2mm
Print width
203 dpi: 160.0mm
305 dpi: 160.0mm
Media width
Not cleared
B-EX4T1
Item
Initial value
Sensor
(Note)
TRANSMISSIVE
Mode
BATCH
Print Speed
203 dpi: 6 ips
305 dpi: 5 ips
Ribbon
(Note)
RBN w/o save
Direction
BOTTOM
Media pitch
(Note)
203 dpi: 76.0mm
305 dpi: 76.0mm
Print length
203 dpi: 74.1mm
305 dpi: 74.2mm
Print width
203 dpi: 104.0mm
305 dpi: 106.7mm
Media width
Not cleared
Note: Though the setting value is reset to the initial value by a parameter clear, the first online operation
after a parameter clear is performed based on the value set with the initial setting wizard.