4 Replacement Procedures 4.36 Fluorescent Lamp
Assembling the 17.1-inch Sharp fluorescent lamp
To assemble the 17.1-inch Sharp fluorescent lamp, follow the steps below and refer to figures
4-68 to 4-77.
1. Stick the double–sided tapes (N to S) on the BL unit (E).
CAUTION: Be careful for the tapes not to ride on the ramp or not to stick out.
Position of
sticking
Figure 4-68 Replacing 17.1 Inch Sharp fluorescent lamp (9)
4-98 [CONFIDENTIAL] QOSMIO G30 Maintenance Manual (960-546)
To Next Page
Loading...
