Appendices Appendix J Maintenance of TOSHIBA RAI
The following is displayed.
Table J-9 Content of Drive Log display
No. Option Explanation
1 Port Displays the port number of log displayed.
2 Own/Redundant Displays if the displayed log is a log of own port (Own) or a
copy of other port log (Redundant).
3 Time Displays the time when the log is recorded in six digits. The
format is [Year Month Day Hour Minute Second].
4 ID Displays identification ID of log.
5 Port and Degree
of importance
The number displays the port that the drive is connected when
the log is recorded. The alphabet displays the degree of
importance. [j] means information, [W] means warning and [e]
means an error.
6 Message Displays the content of log. When the log is too much and it
can not displayed in the area, the remaining is displayed in
[Detail] area.
7 Range of log Displays the range of log number stored. In this case, it means
that logs with the number of 0 to 26 are stored.
8 Log number Displays the log number that is being displayed.
9 Detail Displays the detailed contents and codes of log. When the
number of logs is 7,168 or more, the details of old log is not
displayed.
J-26 [CONFIDENTIAL] QOSMIO G30 Maintenance Manual (960-546)
To Next Page
Loading...
