Voice Mail
Configuration
Voice Mail Configuration
Parameters
Strata CIX Voice Mail Programming 01/07 3-37
sys_fixed_len8 Maximum number of digits voice mail expects when a caller dials a mailbox
number beginning with 8.
When changing this value, make certain that it is still possible to log in and
send messages to all existing mailboxes that begin with this digit. For
example, if there are five digit mailboxes that begin with this digit, then you
should not set the value of this parameter less than five. Check all
mailboxes, including users, guests, and reserved (411, 990, etc.)
Possible values: 1~8
Default: 8
sys_fixed_len9 Maximum number of digits voice mail expects when a caller dials a mailbox
number beginning with 9.
When changing this value, make certain that it is still possible to log in and
send messages to all existing mailboxes that begin with this digit. For
example, if there are five digit mailboxes that begin with this digit, then you
should not set the value of this parameter less than five. Check all
mailboxes, including users, guests, and reserved (411, 990, etc.)
Possible values: 1~8
Default: 8
sys_hub_count Number of times that a message can be forwarded automatically by
distribution lists and auto copy mailboxes. After this count is exceeded for a
message, it can not be distributed or copied. The purpose of this setting is to
limit the number of copies that can be created if there is a loop in the
distribution list or copy box structure. A loop can occur, for example, when
two distribution lists include each other as members.
Default: 2
sys_language_table Sets language name and language ID in system.
Possible values: American English (default)
sys_line_begin The number of the first line that voice mail should use for processing its calls.
Lines with numbers greater than this value will not be used by voice mail,
and will be available for use by other telephony programs (i.e., ACD). It must
be less than or equal to sys_line_end. If not specified, this field defaults to
blank.
sys_line_end The number of the last line that voice mail should use for processing its calls.
Lines with numbers greater than this value will not be used by Stratagy, and
will be available for use by other telephony programs. It must be less than or
equal to sys_line_end. If not specified, this field defaults to the largest
installed line number in the system.
sys_local_amis_node Gateway User Agent number that represents the local AMIS node.
Messages addressed to this node are delivered directly to the real local box
number instead of being shipped out on the network.
Possible values: valid User Agent number.
Default: blank comment line
Table 3-12 Parameter Definitions (continued)
Parameter Description
To Next Page
Loading...
