Voice Mail Configuration
Parameters
3-38 Strata CIX Voice Mail Programming 01/07
sys_local_trace Generates trace information in file form and if desired, displays the data on
the screen.
Syntax: {name filter {list} flags cycle}
where:
name Subdirectory where trace files are stored.
filter Type of trace information to be generated and specifies the
components for which the trace information will be generated.
Possible values are:
1 normal (general nature)
2 support (determines correct installation and
configuration of the Stratagy)
4 debug (intended for debugging—useful for software
developers)
-1 All data
list Specifies the list of trace producers. The trace producer is defined
in the format of “session/application/userID.” The “*” is the wild
character. For example, */*/* specifies all producers.
Note {} also specifies all producers.
flags Defines the action to be taken on the trace information generated.
Possible values are:
0 store only
1 store and display
2 neither store nor display
3 display only
cycle The number of days of history to keep for this trace.
Default: {C:/StratagyES/Message_Log -1 {} 0 5} {Displ -1 {} 3 5}
where:
C:/StratagyES/Message_Log = file name
-1 = all data
{} = all producers
0 = store only
5 = store for 5 days
Displ = display
-1 = all data
{} = all producers
3 = display only
5 = store for 5 days
sys_login_pound Determines whether prompt will say “finish by pressing the pound key” in
login process.
Possible values:
True: (default) Plays prompt, “finish by...”
False: Does not play prompt.
sys_max_call_scr_name_dur Defines the maximum duration for a recording caller’s name when call
screening is enabled on a mailbox.
Default: 5000 ms
Table 3-12 Parameter Definitions (continued)
Parameter Description
To Next Page
Loading...
