Townshend Computer Tools DAT-Link - User Programs; Dlmkrdy

146 DLMKRDY(1)
NAME
dlmkrdy – force a DAT-Link to release its pause output.
SYNOPSIS
dlmkrdy [ –c][–u unit ][–D device ]
DESCRIPTION
dlmkrdy connects to the specified DAT-Link unit and forces its pause output to be released. This
-
b
allows other DAT-Links connected to the selected one via an external sync cable to be used for play
ack or recording independently. Without this, the other units will wait forever for any connected units
T
to start playback or recording.
o indicate this mode, the left channel red VU LED and right channel yellow LED on the front panel
OPTIONS
of the DAT-Link will be illuminated.
–c Clear the forced ready state for the specified DAT-Link. Note that use of any other NetAudio
–
or DAT-Link program will also clear the state.
u unit Specify the DAT-Link unit to use. Default is 0 or the value of the environment variable
DL_UNIT, if it is set.
e–D devic
Specify the device file to open to access the DAT-Link. The default is /dev/datlinknn where
ENVIRONMENT
nn is the DAT-Link unit number.
DL_UNIT Default DAT-Link unit number to use. If not set, unit 0 is used. The value of
D can be overridden by the –u option.L_UNIT
FILES
/dev/datlinknn DAT-Link devices, nn is the unit number of the device.
SEE ALSO
dlmplay(1) dlmrec(1) netaudiod(8)
NOTES
DAT-Link User’s Manual.
The NetAudio server, netaudiod(8),
must not be running to use dlmkrdy. This program is supported only by DAT-Link revisions 1.6 or
D
later.
AT-Link Reference Last change: 1994/11/17 1