Townshend Computer Tools DAT-Link - Netaudiod

196 NETAUDIOD(8)
NAME
netaudiod – network audio server for DAT-Link
SYNOPSIS
netaudiod [ –u unit ][–D device ][–L][–s sockbase ]
DESCRIPTION
netaudiod opens a connection to a DAT-Link interface on the local host and begins accepting connec-
n
tions from clients to allow remote or local access to the DAT-Link. netaudiod must be started before
aplay(1), narecord(1), or other NetAudio clients can be used. Multiple DAT-Link interfaces on a sin-
N
gle host can be handled by specifying different unit numbers for multiple invocations of netaudiod.
ormally, netaudiod is started and monitored by the naserver(8) program which is started at system
T
boot time.
he server can be terminated with the nakillserver(8) command.
OPTIONS
–u unit Specify the DAT-Link unit to use. Default is unit 0.
–D device
Specify the device to open for connection to the DAT-Link. Default is /dev/datlinknn, where
–
nn is the unit number.
L Specify that syslog(3) should be used to log all messages that are normally directed to the ter-
r
m
minal. Messages are logged under the LOG_DAEMON facility. Debug, warning, and erro
essages are logged under their appropriate syslog(3) level.
–s sockbase
Specify the base value of the socket number to use to listen for connections from clients. Con-
c
nections are made to sockbase+unit. The default value is 50000 and should normally not be
hanged.
FILES
/dev/datlinknn DAT-Link device, nn is the unit number of the device.
$ /etc/rcf/∗.rcf Remote control description files.INSTALLROOT
$INSTALLROOT
/etc/dl/Versions DAT-Link firmware revision numbers and index.
.
$ /etc/dl/∗.obj DAT-Link firmware which may be downloaded on startupINSTALLROOT
SCONFIGURATION OPTION
∗netaudiod.Unit Unit number of DAT-Link to use. [0]
]nn.netaudiod.Device Device for DAT-Link unit nn. [ /dev/datlinknn
OSEE ALS
naserver(8) naplay(1), narecord(1), naset(1), nastatus(1) nagetfilter(1) nakillserver(8) syslogd(8)
N
BUGS
DAT-Link User’s Manual.
etAudio Reference Last change: 1993/05/18 1