185
Subnet Mask: Displays the subnet mask of the secondary IP address.
For IPv6 interface
Click Edit to display the following figure:
Figure 10-5 System IPv6
The following entries are displayed on this screen:
Global Config
IPv6:
Interface ID:
Enable/Disable IPv6 function globally on the switch.
Choose the interface type and input the interface ID.
types include VLAN, routed port and port channel.
Link-local Address Config
Config Mode: Select the link-local address configuration mode.
Manual:
When this option is selected, you should assign a
link-local address manually.
Auto: When this option is selected,
the switch will generate a
link-local address automatically.
Link-local Address: Enter a link-local address.
To Next Page
Loading...
