EasyManuals Logo

TP-Link TL-SG5426 User Manual

TP-Link TL-SG5426
499 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #367 background imageLoading...
Page #367 background image
Command Line Interface
4-126
4
Example
This example shows the configuration setting for port 24.
Console#show interfaces switchport ethernet 1/24
Broadcast threshold: Enabled, 500 packets/second
LACP status: Enabled
Ingress Rate Limit: Disabled, 100000 Kbits per second
Egress Rate Limit: Disabled, 100000 Kbits per second
VLAN membership mode: Hybrid
Ingress rule: Enabled
Acceptable frame type: All frames
Native VLAN: 1
Priority for untagged traffic: 0
Gvrp status: Disabled
Allowed Vlan: 1(u),
Forbidden Vlan:
Private-VLAN mode: NONE
Private-VLAN host-association: NONE
Private-VLAN mapping: NONE
Console#
Table 4-43 Interfaces Switchport Statistics
Field Description
Broadcast threshold Shows if broadcast storm suppression is enabled or disabled; if enabled it also
shows the threshold level (page 4-122).
Lacp status Shows if Link Aggregation Control Protocol has been enabled or disabled
(page 4-132).
Ingress rate limit Shows if ingress rate limiting is enabled, and the current rate limit. (page 4-129).
Egress rate limit Shows if egress rate limiting is enabled, and the current rate limit. (page 4-129).
VLAN membership mode Indicates membership mode as Trunk or Hybrid (page 4-170).
Ingress rule Shows if ingress filtering is enabled or disabled (page 4-171).
Note: Ingress filtering is always enabled.
Acceptable frame type Shows if acceptable VLAN frames include all types or tagged frames only
(page 4-171).
Native VLAN Indicates the default Port VLAN ID (page 4-172).
Priority for untagged traffic Indicates the default priority for untagged frames (page 4-184).
Gvrp status Shows if GARP VLAN Registration Protocol is enabled or disabled (page 4-165).
Allowed Vlan Shows the VLANs this interface has joined, where “(u)” indicates untagged and
“(t)” indicates tagged (page 4-173).
Forbidden Vlan Shows the VLANs this interface can not dynamically join via GVRP (page 4-174).
Private VLAN mode Shows the private VLAN mode as host, promiscuous, or none (4-182).
Private VLAN
host-association
Shows the secondary (or community) VLAN with which this port is associated
(4-183).
Private VLAN mapping Shows the primary VLAN mapping for a promiscuous port (4-184).

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link TL-SG5426 and is the answer not in the manual?

TP-Link TL-SG5426 Specifications

General IconGeneral
BrandTP-Link
ModelTL-SG5426
CategorySwitch
LanguageEnglish

Related product manuals