Configuring the Switch
3-38
3
• Level – The security level used for the user:
- noAuthNoPriv – There is no authentication or encryption used in SNMP
communications. (This is the default for SNMPv3.)
- AuthNoPriv – SNMP communications use authentication, but the data is not
encrypted (only available for the SNMPv3 security model).
- AuthPriv – SNMP communications use both authentication and encryption (only
available for the SNMPv3 security model).
• Authentication – The method used for user authentication.
(Options: MD5, SHA; Default: MD5)
• Authentication Password – A minimum of eight plain text characters is required.
• Privacy – The encryption algorithm use for data privacy; only 56-bit DES is
currently available.
• Actions – Enables the user to be assigned to another SNMPv3 group.
To Next Page
Loading...
Need help?
General