Transonic HT331-FT - AureFlo Cart

AU-OPR-AureFloFT-EN,
Rev H
11
C. AureFlo
®
Cart
MECHANICAL SPECIFICATIONS
Height: 63” (160.02 cm); Width: 20” (50.8 cm); Depth: 20” (50.8 cm)
Footprint: 22” x 22”
Weight: 107 lbs. (48.6 kg)
VESA Mount: Industry standard mount for attaching a VESA Mount 2.95” x 2.95” for 12” - 22” diagonal
screen with weight range up to
30 lbs (14 kg)
LOADING CONDITIONS
● Shelf with HT300 Series mounting bracket: Flowmeter: 22 lbs maximum; Shelf load: 6 lbs maximum
● Shelf with sliding drawer: Drawer capacity 5 lbs maximum; Shelf load 15 lb maximum; 2-4 inch locking
casters
● Maximum system weight: 110 lbs.
ELECTRICAL SPECIFICATIONS
The cart provides connections to the AC power source for the HT300 Series Compatible Flowmeter, printer
and the AureFlo
®
Monitor. Do not plug any ancillary equipment other than that recommended in this
manual into the AureFlo’s
®
power outlet on its cart. Before installing any devices on the AureFlo
®
cart,
make sure that the system is powered off and the line cord is disconnected from the cart.
INPUT POWER
100-240VAC; 50/60Hz; 500VA Maximum
FUSES
BEL T4L: Transonic
®
Part #: TFSB4AM5 x 20; Mfg. part #: BEL5ST4-R
PRINTER
18VDC auxiliary power connection: The auxiliary power connection is provided to power printers that
support an 18VDC input voltage.
● Output voltage: 18VDC ± 5%
● Output current: <2.5A
Specications