Trimble R6 User Manual

CHAPTER
18
Trimble R6/R7 GPS and Trimble R8 GNSS Receivers User Guide 115
Default Settings 18
In this chapter:
Q Default settings
Q Resetting to factory defaults
All receiver settings are stored in application files.
The default application file is stored permanently
in the receiver, and contains the factory default
settings for the receiver. whenever the receiver is
reset to its factory defaults, the current settings
(stored in the current application file are reset to
the values in the default application file.
You cannot modify the default application file.
However, if there is a power up application file
(Power_up) in the receiver, the settings in this file
can be applied immediately after the default
application file, overriding the factory defaults.
For more information, see Application files,
page 98.

Trimble R6 Specifications

General

Brand	Trimble
Model	R6
Category	GPS
Language	English