12 Overview
78 Trimble R6/R7 GPS and Trimble R8 GNSS Receivers User Guide
Trimble R6 GPS and R8 GNSS Receiver Operation
12.1Features
The receiver provides the following features:
• Trimble R-track technology, which allows the receivers to track the following:
– GLONASS (Trimble R6 GPS and Trimble R8 GNSS receivers)
– L2C and L5 (Trimble R8 GNSS receiver)
• Centimeter-accuracy, real-time positioning with RTK/OTF data, up to 10 Hz
position updates
• Submeter-accuracy, real-time positioning using pseudorange corrections
• Adaptive dual-frequency RTK engine
• SBAS WAAS/EGNOS support
• Automatic OTF (on-the-fly) initialization while moving
• Single Lithium-ion rechargeable battery
• Cable-free Bluetooth communications with the Trimble Attachable Control Unit
(ACU), TSC2
™
, TSCe
™
, or TCU controller with BlueCap
®
module
• Two RS-232 serial ports for:
– NMEA output
–RTCM SC-104 input and output
– Trimble Format (CMR
™
& CMR+
™
) input and output
• One TNC radio antenna connector
• 11 MB internal memory for data storage
• Internal 450 MHz radio with a transmit option or GSM module
12.2Use and care
The receiver can withstand the rough treatment that typically occurs in the field.
However, it is a high-precision electronic instrument and should be treated with
reasonable care.
C
WARNING – Operating or storing the receiver outside the specified temperature range
can damage it. For more information, see Chapter 17, Specifications.
High-power signals from a nearby radio or radar transmitter can overwhelm the
receiver circuits. This does not harm the instrument, but it can prevent the receiver
electronics from functioning correctly. Avoid using the receiver within 400 meters of
powerful radar, television, or other transmitters. Low-power transmitters such as those
used in cellphones and two-way radios normally do not interfere with receiver
operations.
For more information, contact your local Trimble distributor.
To Next Page
Loading...
Need help?
General
