EasyManuals Logo

Trimble R6 User Manual

Default Icon
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #46 background imageLoading...
Page #46 background image
4 General Operation
32 Trimble R6/R7 GPS and Trimble R8 GNSS Receivers User Guide
Trimble R7 GPS Receiver Operation
4.6 Resetting to defaults
C
WARNINGDo not hold down [P] for more than 30 seconds. After 30 seconds, any
application files stored in the receiver are deleted and the CompactFlash card is
reformatted.
To reset the receiver to its factory default settings, hold down [P] for at least 15 seconds.
Resetting the receiver to its factory defaults also deletes any ephemeris file in the
receiver.
For more information, see Chapter 9, Default Settings.
4.7 Formatting a CompactFlash card
C
WARNINGFormatting a CompactFlash card while it is in the receiver deletes all the data
files on the card and all the application files in the receiver.
To format a CompactFlash card for use in a Trimble R7 GPS receiver, insert the card in
the CompactFlash port and then hold down
[P] for at least 30 seconds. After 15
seconds, the receiver is reset to its factory defaults, and any ephemeris file is deleted.
After 30 seconds, any files stored on the card are deleted and the CompactFlash card is
reformatted.
Note – When you use
[P] to format the CompactFlash card, a quick format is performed. A
quick format reformats the card for use with the Trimble R7 GPS receiver and deletes all
data on the card. A full format checks the card for errors or bad sectors, and is only
necessary if the card is corrupted. To perform a full format, use the GPS Configurator
software. For more information, see The GPS Configurator software, page 50.
4.8 Batteries and power
C
WARNINGDo not damage the rechargeable Lithium-ion battery. A damaged battery
can cause an explosion or fire, and can result in personal injury and/or property damage.
To prevent injury or damage:
Do not use or charge the battery if it appears to be damaged. Signs of damage include,
but are not limited to, discoloration, warping, and leaking battery fluid.
Do not expose the battery to fire, high temperature, or direct sunlight.
Do not immerse the battery in water.
Do not use or store the battery inside a vehicle during hot weather.
Do not drop or puncture the battery.
Do not open the battery or short-circuit its contacts.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Trimble R6 and is the answer not in the manual?

Trimble R6 Specifications

General IconGeneral
BrandTrimble
ModelR6
CategoryGPS
LanguageEnglish

Related product manuals