7 Software Utilities
54 Trimble R6/R7 GPS and Trimble R8 GNSS Receivers User Guide
Trimble R7 GPS Receiver Operation
8. In the Network number field, select the same network that is set on your base
radio.
9. In the Country setting field, select one of the following (according to how your
base radio was shipped):
– Your country (if available). This sets the radio to the a specific frequency
range being transmitted by the base radio.
– A single frequency. This limits the frequencies used to those authorized in
your particular country.
10. Click
OK.
The WinFlash utility updates the radio settings and then restarts the receiver.
To Next Page
Loading...