Model 3440-L F–21
F. MAINTENANCE
Table F–2. 3440-L Base Mechanical Assembly Parts
Match the reference number (Ref #) with the correct part in Figure F–4 on
the opposite page.
Ref # Part Number Description Qty
1 105256 3400 Base Machining 1
2 100996 3400 Sliding Block 1
3 102351 3400 Round Bioshield 1
4 105264 3400 Bottom Plate Assembly 1
5 102069.1000 2400/3400 Wiper Cap 1
6 104594 Source Rod Bearing 2
7 107412 Source Cap 1
8 102399 3400 Shield Spring LC-055H-6 1
9 000608.1101 Screw, 10-32 x 1/2 FHMS Phil SS 4
10 012752 Seal, Wiper (V.S. S-35-14) 1
11 012759 Seal, Oil ID 5/8" #6204 2
13 013200 Fitting, 3/16 Grease w/ Serrated Shank 1
14 001006.4090 Screw, 5/16-18 x 3/8 Set Knurl 3
15 101603.0510 3/32 Dia. x 5/16 L. Roll Pin 2
16 012789 Magnalube-G Lubricant 14.5 oz .01
17 105239 Baseplate Gasket 1
18 018127.0001 Loctite, 242 .001
19 105309 Spring Guide 1
Table F–3. 3440-L Source Rod Handle Assembly Parts
Match the reference number (Ref #) with the correct part in Figure F–5 on
the opposite page.
Ref # Part Number Description Qty
1 104556 Gauge Handle 3440 1
2 104553 3400 Plunger 1
3 105108 Trigger 1
4 012200 Spring, Lee #LC-0242G-7 1
5 101604.1610 Roll Pin, 1/8 Dia. x 1" 1
6 012779.3000 Plug, Heyco Cap. #2643, Black 1
7 000824.4800 Screw, 1/4 - 20 x 1-1/2 Soc. HD Cap 1
8 018127.0001 Loctite 242 .005
To Next Page
Loading...
Need help?
General
