Mobile Belt Loader Model 660 Operation
Operation Manual
Operation - 3 - 42 CD397-Oper
3.8Fluids
The following tables contain information about fluids used in the Mobile Belt Loader Model 660.
These fluids must be checked daily.
TU-154B 94 in. (238.76 cm) 95 in. (241.3 cm)
TU-204 111.4 in. (282.96 cm) 104.3 in. (264.92 cm)
YAK-40 102.8 in. (261.11 cm) N/A
YAK-42 99.7 in. (253.24 cm) 94.4 in. (239.78 cm)
TableOperation-3-12: HydraulicFluid
Item AmbientTemperature HydraulicFluidType
1
-60° F (-51° C) to +50° F (+10° C) Mobil DTE II
2
-15° F (-26° C) to +140° F (+60°C) Mobil DTE I3
TableOperation-3-13: EngineOil
Item AmbientTemperature
Oil(MustmeetAPIService
SE/CC)
1
-10° F (-23° C) to +90° F (+32° C) Gasoline Engine: 10W-40 SJ
Diesel Engine: 15W-40 CJ-4
TableOperation-3-14:Fluids
Item Component Interval Lubricant
1
Transmission Check level weekly Dexron VI ATF
2
Brake Cylinder Check level weekly DOT3 Heavy Duty Brake Fluid
3
Conveyor Drive Chain Lube weekly Same as engine oil
4
Rear Axle Check at 6 months 85W-90 Limited Slip
5
Zerk Fittings Lube at 6 months Chassis Grease
6
Wheel Bearings Repack at 24 months Wheel Bearing Grease
TableOperation-3-11:
AircraftCompatibility(Continued)
AircraftType FrontDoor RearDoor