EasyManua.ls Logo

TUG Technologies 660 - Iata; Sae; ISO EMC Evaluation

TUG Technologies 660
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Mobile Belt Loader Model 660 Operation
Operation Manual
Operation - 2 - 24 CD397-Oper
Slowly let the conveyor down until the safety prop aligns with sockets on bottom of the lift
arm.
2.2IATA
The following are IATA standards that TUG follows when designing GSE.
AHM 913: Basic Requirements for Aircraft Ground Support Equipment
AHM 914: Compatibility of Ground Support Equipment for Aircraft Types
AHM 915: Standard Controls
AHM 925: Functional Specification for Self-Propelled Conveyor-Belt Loader
IATA: Ground Operations Manual (Effective April 2013)
2.3SAE
The following are SAE standards that TUG follows when designing GSE.
AIR 1336A: Vehicle Electrical Systems
AIR 1375C: Minimum Safety Requirements for Special Purpose Airline Ground Support
Equipment
AIR 4286: Maintenance of Ground Support Equipment
AIR 4905: Wheel Chocks
ARP1247D: Aircraft Ground Support equipment - General Requirements
ARP1287A: SAE Standards for Use in the Design of Aerospace, Vehicular Ground
Equipment
AS4828A: Technical Manual requirements for Ground Support Equipment
2.4ISOEMCEvaluation
The following are ISO EMC Evaluation standards that TUG follows when designing GSE.
EN 12895: Industrial Trucks Electromagnetic Compatibility
EN 55011: Radiated Emission
EN 61000-4-3: Radiated Immunity
EN 61000 -4-2: ESD Immunity
EN 12100: Safety of machinery General principles for design
EN 4413: Hydraulic fluid power General rules and safety requirements
EN 4413: Hydraulic fluid power General rules and safety requirements
EN 13849-1: Safety of machinery Safety related parts of control systems
EN 60204-1: Safety of machinery Electrical equipment of machines
EN 62061-1: Safety of machines Functional safety of safety related electrical, electronic,
and programmable electronic control systems
EN 60259: Degrees of protection provided by enclosures
CAUTION: Make sure the safety prop is fully engaged inside sockets
before working under the conveyor.
CAUTION: Lower the conveyor GENTLY onto yellow safety props or struc-
tural failure may result.

Table of Contents

Related product manuals