Operation Mobile Belt Loader Model 660
Operation Manual
CD397-Oper Operation - 2 - 25
• EN 12312-3: Aircraft ground support equipment Part 3 Conveyor Belt Vehicle
• EN 1915-1: Aircraft ground support equipment - Part 1 Basic safety requirements
• EN 1915-2: Aircraft ground support equipment - Part 2 Stability and strength requirements
• EN 1915-3: Aircraft ground support equipment - Part 3 Vibration measurement
• EN 1915-4: Aircraft ground support equipment - Part 4 Noise measurement
• EN 1915-4: Safety of machinery Sound level test
2.5ISOProductSafetyEvaluation
The following are ISO Product Safety standards that TUG follows when designing GSE.
• EN 12100: Safety of machinery: general principles for design. Risk assessment and risk
reduction
• EN 4413: Hydraulic fluid power: General rules and safety requirements for systems and
their components
• EN 13849-1: Safety of machinery: Safety related parts of control systems Part 1 General
principles of design
• EN 60204-1: Safety of machinery: Electrical equipment of machines
• EN 60204-1: Safety of machinery: Electrical equipment of machines
• EN 60204-1: Safety of machinery: Electrical equipment of machines
• EN 62061: Safety of machinery: Functional safety of safety related electrical, electronic
and programmable electronic control systems
• EN 60259: Degrees of protection provided by enclosures EN 12312-3 -Aircraft ground
support equipment - specific requirements - Part 3: conveyor belt vehicle
2.6LocationsofTechnicalConstructionFiles
The Technical Construction Files are in two places:
1. F2 Labs, Ohio, USA (CE Certifying Body)
2. TUG Technologies Corporation, Kennesaw, GA, USA
The Technical File at TUG will be made available at our premises if requested.
To Next Page
