TUG Technologies 660 - Safety Guidelines and Procedures; General Safety Guidelines

Safety Mobile Belt Loader Model 660
Operation Manual
CD397-Oper Safety - 1 - 1
Safety
Section1:GeneralSafetyGuidelines
1.1Introduction
Operator and mechanic safety is important at TUG. During the design and production of every
product, a thorough safety review of all components is standard operating procedure. As a result
of this review, safety warnings, cautions, and notes are provided throughout this manual. It is
important that operators and mechanics become familiar with all of these safety requirements.
To reinforce this action, this part of the manual has been devoted to safety.
The safety part of this manual covers the following:
• Introduction
• Standard Safety Features
• Optional Safety Items
• Operator Safety Responsibility
• Mechanic Safety Responsibility
• IATA Flightline Safety Guidelines
It is strongly recommended that this chapter be reproduced and bound in the operator’s book,
along with your station safety rules.
1.2StandardSafetyFeatures
The following safety features are standard.
CAUTION: Every operator and mechanic involved with this equipment must
read and abide by this safety section.
TableSafety-1-1:StandardSafetyEquipment
No. Equipment
1 Recessed headlights
 Combination tail and stop lights
3 Back-up lights