Mobile Belt Loader Model 660 Safety
Operation Manual
Safety - 1 - 12 CD397-Oper
1.7.3Collisions
Every operator must take precautions to prevent collisions. If a collision occurs, remain calm and
perform the following steps:
1. Refer and adhere to your company’s/station’s emergency policies and procedures.
2. All engines of units involved in the collision should be turned off.
3. Notify emergency personnel and supervisory personnel as outlined in your company’s/
station’s emergency policies and procedures.
WARNING: IN A COLLISION, INJURIES, POSSIBLE FUEL LEAKS, OR DAM-
AGE TO THE VEHICLE CAN OCCUR.
WARNING: IN CASE OF A FUEL LEAK - NO SMOKING, NO OPEN FLAMES,
NO ELECTRICAL DEVICE OPERATIONS.
To Next Page
Loading...
