TUG Technologies 660 - Optional Safety Features; Table Safety-1-2: Optional Safety Equipment

Safety Mobile Belt Loader Model 660
Operation Manual
CD397-Oper Safety - 1 - 3
1.3OptionalSafetyFeatures
The following table contains a list of optional safety items.
31
Independent expanding shoe and drum park brake on transmission output shaft or
in rear axle
32 Non slip covering on floor board
33 Non slip surface on brake and accelerator pedal
34
High coolant temperature/low oil pressure shutdown (Ford 2.5L only) (optional on
other engines)
TableSafety-1-2:OptionalSafet yEquipment
No. Items
1 Backup alarm
2 Amber flashing light
3 Amber strobe light
4 Mud and snow tires
5 Work lights
6 Reflective striping
7 Engine kill E-Stop buttons on conveyor and instrument panel
8 Conveyor up/down movement alarm
9
Transmission neutral only and park brake applied safety circuit for belt conveyor
movement interlock (Must be in neutral, park brake applied for conveyor to oper-
ate)
10 Gap filler strip between conveyor belt and front rubber bumper
11 Rubber bumper roll across the rear of the conveyor frame
12 Steel hoop guard across the rear of the conveyor frame
13 Cooling fan cover
14 Alternator belt
15 Manifold cover
TableSafety-1-1:StandardSafetyEquipment(Continued)
No. Equipment