Mobile Belt Loader Model 660 Safety
Operation Manual
Safety - 1 - 2 CD397-Oper
4 Turn signals with Hazard Warnings
5 Dual independent brake systems with brake warning light
6 Power-boosted front disc brakes and rear drum brakes
7 Adjustable over-center park brake hand lever
8 Lighted transmission shift control
9 Shift control with hand throttle interlock
10 Transmission shift lever guard
11 Neutral only start switch in shifter control
12 Angled right front corner
13 Ease of maneuverability
14 Center of steering wheel operated horn
15 Labeled controls
16 Left front driver position for excellent visibility
17 Conveyor lifting emergency pump
18 Conveyor safety props
19 Hydraulic steering
20 Pilot pressure operated cylinder holding valves
21 Pilot pressure operated reverse belt holding valve
22 Belt drive cushion valve
23 Hydraulic system pressure designed at 1500 psi (10.34 MPa or 102.07 atm) max.
24
All hydraulic hoses rated at 3250 psi (22.41 MPa or 221.15 atm). Always use OEM
hoses during replacement
25 Lagged belt driving roller
26 Hand and / or Guide Rails on either side of the conveyor
27 Non-slip fender surfaces
28 Boot cutouts in rear bumper for safe access to belt as walkway
29 Bolted down hydraulic tank and battery cover
30 Retracting Seat belts
TableSafety-1-1:StandardSafetyEquipment(Continued)
No. Equipment
To Next Page
Loading...
