TUG Technologies 660 - Page 29

Introduction Mobile Belt Loader Model 660
Operation Manual
CD397-Oper Introduction - 1 - 15
Conveyor Kill Switch 0.5
Conveyor Kill Switch Wiring Harness 0.5
Electric Eyes 0.5
Glow Plug Relay 0.5
R&RHydraulics
Hydraulic Pump 1.0
Hydraulic Pump Pulley 0.5
Main Manifold 1.0
Steering, Brakes Relief, & Adjustment Valve 0.5
2-Lever Valve Under Seat 1.0
Valve Lever 0.3
Relief Valve Under Seat 1.0
Main Hydraulic Pressure Relief Valve 0.5
Repair Hydraulic Leak 0.5
Electric Control Valve Assembly 1.0
Conveyor Hydraulic Motor 1.5
Conveyor Drive Roller Chain 0.5
Hoses Through Lift Arm to Conveyor 0.5
Hoses to Lift Cylinder
Front or Rear Lift Cylinder 2.0
Cylinder Holding Valve 1.0
Front Lift Arm 2.5
Rear Lift Arm 1.5
Small Manifold Valve Under Front of Conveyor 1.0
Adjust Conveyor Reverse Direction Holding Valve 1.0
Direction Valve Under Conveyor 1.0
Front or Manual Controls 1.0
Repair Direction Valve Spool Seal 1.0
TableIntroduction-1-2:FlatRateLaborGuide(Continued)
Part Hours