Safety Mobile Belt Loader Model 660
Operation Manual
CD397-Oper Safety - 2 - 23
- Safety Signs are green and square
- Mandatory Action Signs are blue and circular
- Prohibition Signs are a red circle with a red diagonal
- Warning Signs are safety yellow color and triangular
This page is being added to all TUG Service Manuals to aid interpretation of the graphic symbols
being used on TUG Technologies equipment. TUG Technologies strongly suggests using this
information as training material for operators of TUG equipment.
Since ISO 7000 and 7010 are under constant revision, TUG Technologies will maintain this page,
keeping TUG Technologies manuals current as ISO 7000 and ISO 7010 evolve.
NOTE:
As decals become worn or damaged, new decals can easily be ordered by referring
to the TUG Part Number written on the damaged decal. The Decal Part Number is
also listed in the Decal Location Guide in the 660 Maintenance Manual.
To Next Page
Loading...
