25
25
B) Hazard switch (ref. Fig. 11)
• Press the button ‘ ’ to turn ‘ON / OFF’ the
hazard lamps.
- If the hazard indication is turned ‘ON’ while
the turn signal indicators are active, the
turn signal indicators will be suspended
temporarily.
- Turn signal indication will resume automatically
once the hazard lamps are turned ‘OFF’ (if
they were active before hazard lamp ‘ON’).
- On activation of hazard lamps, both left and
right turn signal indicators ‘ ’ flashes.
Hazard lamps can be switched ‘ON / OFF’ only by means
of hazard switch.
Hazard switch works only when the ignition is turned ON
and the lamps continue to work even if the ignition is
turned OFF during its working.
Avoid using hazard lamps while the engine is turned OFF
for prolonging time to avoid battery drain.
Note
Fig. 11
B
To Next Page
Loading...
Need help?
General
