26
C) Cruise control switch (ref. Fig. 12)
Cruise control switch has three operations in it.
Cruise control main switch operation:
• Momentary vertical press of cruise control switch
knob turns ‘ON / OFF’ the cruise control.
- When the cruise control is activated, the
cruise control indicator of the instrument
cluster ‘ ’ glows along with it.
Cruise control ‘Set/-’ switch operation:
Gentle push of cruise control switch knob towards
‘Set/-’ position activates the ‘Set/-’ switch.
• While the cruise control is turned ‘ON’ (cruise
state), you can decrease already set cruise speed
in the following manner:
- Short press (less than 1.5 secs) the knob to
decrease the vehicle speed by 1 km/h from
original set speed.
- Long press (more than 1.5 secs) the knob to
decrease the vehicle speed by 5 km/h from
original set speed with rounding.
• While the cruise control is suspended (stand by
mode), the ‘Set/-’ switch can be used as below:
- Short press (less than 1.5 secs) the knob to
set the current vehicle speed as the cruise
control set speed.
When the cruise control is suspended (stand by mode),
long press of ‘Set/-’ switch knob will not have any impact
on the system.
Fig. 12
C
To Next Page
Loading...
Need help?
General
