28
Conditions for cruise control suspend / cancel
• According to the accelerator grip position of the
vehicle, override operation will be detected by
the system and cruise control will be suspended.
Vehicle speed will come back to ‘SET’ speed
value after releasing the throttle within 10 secs.
- Cruise control will be canceled in case the
override operation continues more than
10 secs.
• If the accelerator grip position is overclosed to
the negative direction (accelerator blip function),
cruise control will be cancelled.
• According to the brake lever or pedal operation by
the rider, the ABS system of the vehicle detects
the braking intention and cancels the cruise
control. The cruise control will not be allowed to
activate till the brake input is present.
• While the cruise control is active, the rider can
use the clutch lever for gear shifting. If the clutch
is applied and released within 2 secs, the cruise
control will be active. Incase the clutch is kept
in applied condition for more than 2 secs, cruise
control will get cancelled.
• Cruise control will be cancelled if the engine kill
switch is activated.
Do’s and Dont’s while cruise mode is engaged
• Avoid keeping foot on the brake pedal while
riding. Any input from the brake pedal will opt out
the vehicle from cruise mode.
• Gear shift operation during vehicle ride will not
affect the cruise control unless the gear position
is changed into neutral. If the gear is shifted to
neutral position cruise control will be cancelled
and not allowed to be activated.
• Once the cruise mode is suspended, engine
braking could be engaged to confirm the rider
on the manual ride activation, depending on APS
position and engine rpm.
The working rpm range of cruise control is 2700 to 8300
rpm. Incase if the rpm range is below or above, downshift
or upshift the gear respectively to match with it.
Brake and clutch should be pressed atleast once to
enable cruise control after every ignition ‘ON’.
Cruise control will not work when there is an active error
in EMS or ABS system of the vehicle.
Cruise control will be activated only when the vehicle is
in 1st to 6th gear. It will not get activated in neutral gear.
To Next Page
Loading...
Need help?
General
