TVS Apacha RTR 310 - Page 92

75
75
- After entering the ‘Preferences’ menu, select
the ‘Traction Control’ option using ‘Up’ (D2) or
‘Down’ (D3) arrow (ref. Fig. 24).
- Once the ‘Traction Control’ option is selected,
press the ‘ENT’ (D1) button.
- Press the ‘ENT’ button to set the ‘ON’ or
‘OFF’ the traction control.
Key functions of Traction control
• Control engine torque and ensure optimal driving
force on the road.
• Prevent the rear wheel from spinning during
acceleration, and counteract the front wheel from
leaving the ground.
• Regulate the maximum engine torque, when the
rear wheel spins during vigorous acceleration.
• Best acceleration with keeping stability by proper
wheel longitudinal slip control at rear.
• Mitigation for uncontrollable large Wheelie by
engine torque down.
d4. Quickshifter
Quickshifter feature will assist while shift the gear
refer page 35 for details.
• Quickshifter feature can be turned ‘ON’ or ‘OFF’
through connected instrument TFT cluster.
- After entering the ‘Preferences’ menu, select
the ‘Quickshifter’ option using ‘Up’ (D2) or
‘Down’ (D3) arrow (ref. Fig. 24).
- Once the ‘Quickshifter’ option is selected,
press the ‘ENT’ (D1) button.
Set km/h 60
oc
Coolant Temp 30
km
Range 30
rpm
6700
5
km/h
URBAN
05:30 PM
Quickshifter
Off
On
SET
999
MENU
The last ‘Quickshifter’ setting is remembered in every
ignition ‘ON’ cycle.
Note