TVS Apacha RTR 310 - Page 98

81
81
- After entering the ‘Preferences’ menu, select
the ‘Clock’ option using ‘Up’ (D2) or ‘Down’
(D3) arrow (ref. Fig. 24).
- Once the ‘Clock’ option is selected, press the
‘ENT’ (D1) button.
• In ‘Automatic’ mode, the clock in the connected
instrument TFT cluster will get auto-synced once
the mobile is connected to the cluster. Refer
page 103 for detailed procedure of connecting
the mobile.
• Press the ‘Down’ button to select the ‘Manual’
mode and press the ‘ENT’ button.
- In ‘Manual’ mode, the hours value can be
adjusted by using ‘Up’ and ‘Down’ button.
Pressing the ‘ENT’ button sets the hour and
the control moves automatically to minute
value.
- Similarly, the minute value can be adjusted
by using ‘Up’ and ‘Down’ button. Pressing
the ‘ENT’ button sets the minute and the
control moves automatically to ‘AM’ or ‘PM’
selection.
- Toggle between ‘AM’ or ‘PM’ using the ‘Up’
and ‘Down’ buttons and then press the ‘ENT’
button.
- Press ‘Return’ (D4) button to exit and set
clock mode.
Set km/h 60
oc
Coolant Temp 30
km
Range 30
rpm
6700
5
km/h
URBAN
05:30
PM
Set Time
09
09
09
09
PM
PM
999
MENU
Set km/h 60
oc
Coolant Temp 30
km
Range 30
rpm
6700
5
km/h
URBAN
05:30 PM
Format Setting
24 Hours
12 Hours
SET
999
MENU