5-43
352 41
6
7
9
8
Note :
① Pay attention to the installed
direction of the metal
⑤Apply lock tight
⑥Apply three bond (TB1215)
⑦Pay attention to the installed
direction of the oil seal
Note :
① ④ Apply grease on the surface
Fig.5-80 PTO 2 speed version
Fig.5-79 PTO 2 speed version
(6) Rear PTO shift mechanism
1 2 3
45
1.PTO shifter stay 4.PTO shifter
8.Arm 19.Change arm
1.PTO shaft 17.Drive shaft(12/15)
5.Gear (helical/48) 9.Gear(helical/45)
To Next Page
Loading...
