TYM T723 - Page 20

Traveling speeds : Km/h (Mile/h)
1-19
Model T723
Speed(PTO rpm/Engine rpm) 2200 x 12/48 = 500, 2200 x 15/45 = 733
Shaft Diameter.Spline teeth 1 3/8, 6 spline
PTO shaft
Traveling Speed : Km/hour (mile/hour) / 2200 rpm
MODEL T723
Creeper Range shift Main shift Forward Reverse
OFF
L 1 0.93 (0.58) 0.95 (0.59)
2 1.47 (0.91) 1.52 (0.94)
3 2.27 (1.41) 2.33 (1.45)
4 2.82 (1.75) 2.89 (1.80)
M 1 2.98 (1.85) 3.05 (1.90)
2 4.71 (2.93) 4.84 (3.01)
3 7.25 (4.51) 7.44 (4.62)
4 9.02 (5.61) 9.25 (5.75)
H 1 9.77 (6.07) 10.01 (6.22)
2 15.47 (9.61) 15.85 (9.85)
3 23.81 (14.80) 24.39 (15.16)
4 29.60 (18.39) 30.34 (18.85)
ON
L 1 0.28 (0.17) 0.29 (0.18)
2 0.45 (0.28) 0.46 (0.29)
3 0.68 (0.42) 0.70 (0.43)
4 0.85 (0.53) 0.87 (0.54)
M 1 0.90 (0.56) 0.92 (0.57)
2 1.42 (0.88) 1.45 (0.90)
3 2.18 (1.35) 2.24 (1.39)
4 2.72 (1.69) 2.78 (1.73)
H 1 2.94 (1.83) 3.01 (1.87)
2 4.66 (2.90) 4.78 (2.97)
3 7.17 (4.46) 7.35 (4.57)
4 8.91 (5.54) 9.12 (5.67)