10-9
7. Each fuse is connected as follows
Note : Using a large capacity fuse or wire burn
out the wiring system.
Use fuse tongs to replace fuses
The circuit has 11 blade type fuses in its
wiring circuit.When a fuse has blown
replace it with one of the same value.
Fig.10-19
Fig.10-20
Fig.10-18
▶Drawing for fixing position of the fuse
▶Wiring diagram of the electric instrument
A HEAD LAMP 12V55W
B DIRECTION SIGNAL LAMP 12V21W
STOP LAMP BACK LIGHT 12V21/5W
C META PANEL LIGHT 12V3.4W
D WORKING LAMP 12V35W
E DIRECTION SIGNAL LAMP 12V21W
SIDE LAMP 21V5W
F BACK LAMP 12V21W
1 FUSE BOX
2 SLOW BLOW FUSE
3 UNITS FOR DIRECTION
SIGNAL RELAY FOR THE POWER
4 PTO MONITOR
5 COUPLER FOR THE POWER
MAX RATED AMPERE
6 COUPLER FOR THE TRAILER
1. PANEL
2. LIGHT, HORN
3. TURN SIGNAL
4. BRAKE/REVERSE LAMP
5. WORKING LIGHT
6. AUTO ROLLING
7. 4WD
8. AUTO DISK BREAK
9. HAZARD LAMP
10. PERMANENT POWER
11. POWER OUTLET
12. FUEL FILTER
13. CONTRALLER
14. ENGINE STOP
1
3
2
4
5
6
7
8
9
10
11
12
13
14
To Next Page
Loading...
