11-12
SECTION 2.TIGHTENING AND STARTING TORQUE SPECIFIED FOR MAJOR PARTS
1. T723
TIGHTENING PARTS Bolt and Nut
(Hardness)
Tightening
torque
(㎏f·m)
1)Front axle housing (4WD type)
① Axle bracket ∼ Engine tightening bolts
② Front pivot metal(support)tightening bolts
③ Rear pivot metal(support) tightening bolts
④ Front axle∼final case tightening bolts.
⑤ Bearing cover tightening bolts.
⑥ Wheel shaft cover tightening bolts.
⑦ Front wheel tightening bolts.
⑧ Bevel gear case tightening bolts
⑨ Dif-metal (support) tightening bolts
5/8-11UNC (9T)
M 14 (9T)
M 18 (7T)
M 12 (7T)
M 14 (7T)
M 8 (7T)
M 18 (7T)
M 12 (7T)
M 10 (7T)
16.0 ∼ 18.0
16.0 ∼ 18.0
20.0 ∼ 24.0
9.0 ∼ 11.0
13.5 ∼ 14
5.5 ∼ 7.0
23 ∼ 24
9.0 ∼ 11.0
7.5 ∼ 8.9
2)Transmission
① Front transmission∼Engine tightening bolts and nuts
② Front transmission Spacer transmission
tightening bolts and nuts
③ Space transmission∼Rear transmission
tightening bolts and nuts
④ Input metal(support)tightening bolts and nuts.
⑤ Drive pinion metal(support) tightening bolts.
Drive pinion tightening nut
⑥ Dif-case metal(support)tightening bolts.
⑦ Dif case∼ring gear tightening nuts.
M 12 (7T)
M 12 (7T)
M 12 (7T)
M 12 (7T)
M 10 (7T)
M 12
M 12 (7T)
9.0 ∼ 11.0
9.0 ∼ 11.0
9.0 ∼ 11.0
9.0 ∼ 11.0
5.5 ∼ 7.0
5.5 ∼ 7.0
9.0 ∼ 11.0
To Next Page
