BATTERY CHARGER USER’S MANUAL PART- 2: THEORY OF OPERATION
MCEnPC23-REV.2.4 Page 21
Yes
No
Synchro AH
Ok
Pr
sure?you Are
Ok Synchro
Readings? Level0
Ok
Next Pr
Exit
Next
Exit
:getyou Next till Press
Figure 22 : Procedure to synchronize Ampere-Hour meter.
7.2.9 Run / Stop Formation Mode (optional)
The formation mode is to be exclusively
used to prime a battery as per its manufacturer instructions. In this mode,
the charger forms the battery at the preset voltage and during the preset time, after which the charger will go back
into the float mode.
The image below shows how to run or stop formation mode.