Unipower ARR-M Series - Battery Low Current Alarm

BATTERY CHARGER USER’S MANUAL PART- 2: THEORY OF OPERATION
MCEnPC23-REV.2.4 Page 69
xx. Battery Low Current Alarm **
Battery Low Current alarm is activated if the current provided from battery to load decreases below the preset value
during a preset time. We can enable or disable and adjust this alarm as shown on the procedure below:
Alarms?
Ok
Next
P
r
Exit
Adjust? Level1
Ok Next P
r
Exit
ONA 10.0ILBat
Set
ExitNext
P
r
ON
OFF
Next
Exit
:getyou Next till Press
Next
Exit

-
ON ILBat
Current LowBatt
10.0A 136.2V
:getyou Next till Press
ONA 10.0ILBat
Figure 69 : Battery Low Current Alarm adjustments procedure.
* : Included, enabled upon customer request only. Can also be field activated
** : Optional