BATTERY CHARGER USER’S MANUAL PART- 2: THEORY OF OPERATION
MCEnPC23-REV.2.4 Page 77
xxx. Battery Discharge Alarm **
This alarm is activated when the battery start to provide current to the load. In this case, the value of battery current
shown on LCD display (if enabled) will be negative. We can enable or disable and adjust this alarm as shown on the
procedure below:
Alarms?
Ok
Next
P
Exit
Adjust? Level1
Ok
Next
Pr
Exit
OFF DischargBat
Set
ExitNext
Pr
ON
OFF
Next
Exit
:getyou Next till Press
gDischarginBatt
10.0A 136.2V
:getyou Next till Press
OFF DischargBat
-
Next
Exit
1.0A- ThIBat
Figure 79 : Battery Discharge Alarm adjustments procedure.
* : Included, enabled upon customer request only. Can also be field activated
** : Optional
To Next Page
Loading...