Unipower ARR-M Series User Manual

BATTERY CHARGER USER’S MANUAL PART- 2: THEORY OF OPERATION
MCEnPC23-REV.2.4 Page 39
iv. Temperature Post-Charge Mode (optional)
When the Temperature Post-Charge is selected, the charger will revert back from Equalize into the Float mode when
the battery temperature reaches its preset value, during a preset time between 1 and 8191 minutes. We can enable or
disable Temperature Post-Charge as shown on the procedure below:
Control?
Ok
Next
P
r
Exit
Adjust? Level1
Ok Next
P
r
Exit
Eq Stop
Set
ExitNext
P
r
ON TPostChg
Set
Exit
Next
P
r
ON
OFF
Next
Exit
:getyou Next till Press
:getyou Next till Press
Delay
mn 30
Next
Exit

-
ON TPostChg
Next
Exit

-
C 60 TPostChg
Figure 43 : Procedure to set Temperature Post-Charge parameters to Stop Equalize mode.


Unipower ARR-M Series Specifications

General

Brand	Unipower
Model	ARR-M Series
Category	Battery Charger
Language	English