BATTERY CHARGER USER’S MANUAL PART- 2: THEORY OF OPERATION
MCEnPC23-REV.2.4 Page 78
xxxi. Common Relay and Audible Alarm configuration **
Common Relay (if applicable) will be activated when any alarm, that is configured to enable the common relay
occur. We can set common relay parameters as shown on the procedure below:
Alarms?
Ok
Next P
Exit
Adjust? Level1
Ok
Next P
Exit
06 Relay COM
Set
ExitNext
P
ON
OFF
Next
Exit
:getyou Next till Press
Next
Exit
-
OFFLatch Al COM
:getyou Next till Press
06 Relay COM
Next
Exit
FS Logic
NFS
FS
Figure 80 : Common Relay Configuration
Audible Alarm (if applicable) will be active when any alarm occurs. We can enable or disable audible alarm as
shown on the procedure below:
* : Included, enabled upon customer request only. Can also be field activated
** : Optional
To Next Page
Loading...
Need help?
General